IMSCREWS #6 × 5/8" 304 Stainless Steel Flat Head Wood Screws

The "Safe & Strong" Choice for Cabinetry

When 1/2" screws are too short to hold, but 3/4" screws risk poking through the front of your cabinet door, the IMSCREWS #6 x 5/8" Black Stainless Screw is the professional's solution. It maximizes holding depth while keeping your furniture finish safe.

Why 5/8" (16mm) is the Perfect Length:
• Max Grip: It uses nearly the full thickness of a standard 3/4" board for anchoring.
• Safety Buffer: Leaves just enough clearance (approx 3mm) to ensure the screw tip never breaks the surface, even if you countersink deeply.
• Hardware Friendly: Perfect for thick drawer slides or soft-close dampers that eat up screw length.

Why IMSCREWS?
• Integral Black Finish: Not painted. The steel itself is blackened, so it won't peel or clog your driver bit.
• 304 Stainless Steel: Essential for bathrooms and kitchens. It withstands steam and moisture without rusting.
• Sharp Point: Starts easily in wood, plastic, and composite materials.

Technical Specifications:
• Quantity: 50 Pieces
• Size: #6 x 5/8 Inch (3.5mm x 15.9mm)
• Head Type: Flat Countersunk (82¡ã)
• Drive Type: Phillips #2
• Material: 304 Stainless Steel

Common Questions (FAQ):

Q: Will these rust in a bathroom?
A: No. Being made of 304 Stainless Steel, they are highly resistant to rust, making them perfect for vanity cabinets and towel bars.

Q: Is the black color a coating?
A: It is an integral surface treatment, not a paint coating. It will not chip off during installation.

Q: Do I need a pilot hole?
A: For most softwoods and cabinet boards, no. For hardwoods (Oak, Maple), a 3/32" pilot hole is recommended to prevent splitting.

Package Contains:
50 x Black Cabinet Screws (#6 x 5/8")

Key Features

• [THE 5/8" SWEET SPOT] The ultimate length for standard 3/4" (19mm) cabinet doors and plywood. At 5/8" (16mm) long, these screws bite deeper than 1/2" screws for extra strength, yet stay safely under the surface, guaranteeing zero risk of piercing your expensive cabinet face.
• [INTEGRAL MATTE BLACK FINISH] Featuring a professional surface treatment that blackens the steel itself. It is NOT painted. This integral finish eliminates the risk of paint chipping off into your drawer tracks or electronics, maintaining a clean, premium look that lasts forever.
• [STRONGER #6 HOLDING POWER] Upgrading from factory #4 screws• These #6 (3.5mm) screws feature a wider thread diameter that grips tightly into widened or stripped holes. The larger head surface area clamps brackets and hinges securely, preventing sagging over time.
• [RUST-PROOF 304 STAINLESS] Made from 100% 304 Stainless Steel (18-8), offering superior corrosion resistance compared to black oxide or zinc screws. Perfect for Bathroom Vanities and Kitchen Under-Sink hardware where humidity and cleaning agents cause lesser screws to rust.
• [SPECS & PACKAGING] Pack of 50 Pieces. Size: #6 x 5/8 Inch (3.5mm x 15.9mm). Head: Flat Countersunk (82¡ã). Drive: Phillips #2. Pro Tip: Ideal for mounting thicker hardware (like soft-close adapters) where 1/2" screws barely grab the wood.

Specifications

• ASIN: B0FT6XXJ5T
• Internal SKU: IMS1031
• Size: #6 x 5/8"
• Material: Stainless Steel
• Finish: Natural Black
• Head Style: Flat
• Package Quantity: 50