Deep Holding Power for Delicate Wood

Sometimes you need the grip of a long screw but can't risk splitting your wood with a thick shank. The IMSCREWS #4 x 3/4" Black Stainless Screw is the perfect solution for narrow trims, edges, and vintage restoration.

Why Choose #4 x 3/4"?

• Anti-Split Design: The slender #4 shank enters wood smoothly, preserving the integrity of thin strips and molding.

• Extra Reach: 3/4" length reaches solid wood through plaster, drywall, or thick mounting plates.

• Permanent Black: Our chemical blackening process ensures the screws stay black, resisting rust and peeling forever.

Technical Specs:

• Material: 304 Stainless Steel (18-8)

• Finish: Natural Matte Black

• Size: #4 x 3/4 Inch (2.9mm x 19mm)

• Head: Flat Head Phillips

FAQ:

Q: Will these snap if I use an impact driver?

A: Because they are thin (#4) and long, we recommend using a standard drill/driver with low torque or a hand screwdriver, especially in hardwood.

Q: Is the black finish paint?

A: No, it is a chemical surface treatment that will not chip.

Q: Can I use these for outdoor lattice?

A: Yes! 304 Stainless Steel is perfect for outdoor garden projects.

Key Features

• [SLENDER PROFILE - NO SPLITTING] The #4 diameter (2.9mm) combined with 3/4" length (19mm) is engineered for delicate woodworking. It provides deep holding power without splitting narrow wood trims, piano hinges, or thin drawer sides¡ªa common problem with thicker #6 screws.
• [MARINE GRADE 304 STAINLESS] Don't let rust ruin your outdoor projects. Crafted from genuine 304 Stainless Steel (18-8) with a Natural Matte Black finish. These screws are immune to rain, snow, and humidity, making them ideal for outdoor lattice, fencing trim, or boat interior repairs.
• [DEEP GRIP 3/4" LENGTH] When 1/2" screws aren't enough. The extra length bites deeper into the substrate, offering superior pull-out resistance for mounting heavier picture frames, curtain rod brackets, or retrofitting loose cabinet hinges. Total Length: 3/4" (19mm).
• [MATTE BLACK & CLEAN DRIVE] Our chemical blackening process ensures the color is part of the steel. It won't peel off like paint and won't clog the Phillips #1 drive. You get a stealthy, professional finish that blends with black hardware and antique furniture restoration projects.
• [SPECS & PACKAGING] Pack of 50 Pieces. Size: #4 x 3/4 Inch. Head: Flat Countersunk (82¡ã). Drive: Phillips. Material: 304 SS. Installation Tip: For hardwoods (Oak/Teak), we highly recommend a 1/16" pilot hole and hand tightening to prevent snapping due to the screw's slender length.

Specifications

• ASIN: B0FT78G3YV
• Internal SKU: IMS1016
• Size: #4 x 3/4"
• Material: Stainless Steel
• Finish: Natural Black
• Head Style: Flat
• Package Quantity: 50