The "Problem Solver" for Delicate Assembly

Standard deck screws are too thick. Electronics screws are too short. Enter the IMSCREWS #4 x 1" Black Stainless Screw (100 Pack). It bridges the gap between micro-fasteners and structural hardware, offering the reach you need without the risk of splitting your material.

Why Stock the 100-Pack?

• Value: Significantly lower cost per screw than buying small blister packs.

• Availability: This specific "Long & Thin" size is rarely found in local hardware stores.

• Redundancy: Have plenty of spares for large molding projects or multiple repairs.

Ideal Applications:

• Antique Restoration: Fastening loose joints in dry, brittle wood.

• Trim & Molding: Attaching thin quarter-round or decorative strips.

• Spacer Mounting: Passing through thick non-conductive spacers in electronics.

• Hole Repair: Biting deeper into a hole stripped by a 1/2" screw.

Technical Specs:

• Size: #4 x 1 Inch (2.9mm x 25.4mm)

• Material: 304 Stainless Steel (Natural Black)

• Head: Flat Countersunk

• Drive: Phillips #1

• Pro-Tip: Avoid Snapping

Due to the slender #4 shank, these screws cannot withstand the torque of an 18V Impact Driver. Always pre-drill hardwoods and drive slowly.

Key Features

• [100-PIECE WORKSHOP PACK] The smart choice for restoration professionals and hobbyists. This bulk pack ensures you have a plentiful supply of these hard-to-find Slender (#4) x Long (1") screws. Perfect for large-scale trim installation, picture framing, or stocking up your repair bench.
• [ANTI-SPLIT FOR DELICATE WOOD] Standard #6 or #8 screws often split thin wood trims or vintage furniture legs. Our #4 diameter (2.9mm) is engineered to minimize wood stress, allowing you to fasten close to the edge or into dry, aged wood without pre-drilling damage.
• [DEEP REACH & HOLDING POWER] The 1-inch (25.4mm) length provides excellent bite in stripped-out holes (where shorter screws fail) or when mounting 1/2" thick back panels. The Flat Head design sits flush for a seamless, professional look on cabinetry and instruments.
• [304 STAINLESS - MATTE BLACK] Crafted from 100% 304 Stainless Steel (18-8) with a non-peeling Black finish. Unlike painted screws that chip, our integral black surface resists rust and wear, making them ideal for outdoor trellis work or humid marine environments.
• [INSTALLATION WARNING - PLEASE READ] These are slender screws with a high length-to-width ratio. High torque will snap the head. We strongly recommend drilling a 1/16" pilot hole in hardwoods (Oak/Walnut) and using a hand screwdriver or low-torque setting. Pack includes 100 Screws.

Specifications

• ASIN: B0FT6X8B22
• Internal SKU: IMS1020
• Size: #4 x 1"
• Material: Stainless Steel
• Finish: Natural Black
• Head Style: Flat
• Package Quantity: 100